NR 660.10(143)(143) “Well” means any of the following: a bored, drilled or driven shaft, a dug hole whose depth is greater than its largest surface dimension, an improved sinkhole or a subsurface fluid distribution system. NR 660.10(145m)(145m) “Wipe” means a woven or non-woven shop towel, rag, pad, or swab made of wood pulp, fabric, cotton, polyester blends, or other material. NR 660.10(146)(146) “Zone of engineering control” means an area under the control of the owner or operator that, upon detection of a hazardous waste release, can be readily cleaned up prior to the release of hazardous waste or hazardous constituents to ground water or surface water. NR 660.10 NoteNote: See chs. 289 and 291, Stats., for additional definitions. NR 660.10 HistoryHistory: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06; CR 06-102: am. (21), (76) and (77) Register March 2007 No. 615, eff. 4-1-07; EmR1007: emerg. cr. (70m), am. (107), eff. 3-17-10; CR 10-036: cr. (70m), am. (107) Register October 2010 No. 658, eff. 11-1-10; corrections in (15), (141) made under s. 13.92 (4) (b) 7., Stats., Register March 2013 No. 687; CR 16-007: cr. (9m), (19d), (19g), (19j), am. (43) (b), (70m) (a) to (c), cr. (77m), (83m), am. (107) (a), (b), cr. (108m), am. (133) (c), renum. (139) to (139) (intro.) and (a), cr. (139) (b), (c), (145m) Register July 2017 No. 739, eff. 8-1-17; correction in (9m), (43) (b), (83m), (108m) (b) made under s. 35.17, Stats., and correction in numbering of (108m) made under s. 13.92 (4) (b) 1., Stats., Register July 2017 No. 739; CR 19-082: cr. (3m), (3p), (3t), (3w), (3y), (9t), (13m), (19e), (20m), r. and recr. (21), cr. (28m), (28p), (28s), am (29) (a), (31), (34), (43) (a), (b), (46), cr. (50m), (51m), (51t), am. (52), (53), cr. (65m), (67m), r. and recr. (70m), am. (76), (82), (83m), cr. (83t), (97m), (97t), (100m), r. and recr. (107), am. (108), (108m) (a) 1., 3., (b), (122), (126) (b), cr. (138m), r. and recr. (139), am. (141) (b) Register August 2020 No. 776, eff. 9-1-20; correction in (13m) (c), (d), (28), (38), (51m), (60) (g), (82), (83m), (108m) (b), (126) (b) made under s. 35.17, Stats., Register August 2020 No. 776; correction in (50m) made under s. 13.92 (4) (b) 7., Stats., Register April 2021 No. 784. NR 660.11NR 660.11 Incorporation by reference. NR 660.11(1)(1) This section is adopted under ss. 227.21 (2) (b) and 291.05, Stats., to incorporate by reference testing, monitoring, and other technical standards, established by the federal government and technical societies and organizations, to which reference is made in chs. NR 660 to 670. Some materials that are incorporated by reference in other references are hereby incorporated by reference and made a part of this subsection. NR 660.11 NoteNote: Copies of these materials are available for inspection in the offices of the Department of Natural Resources, Madison, Wisconsin, the Legislative Reference Bureau, or may be obtained for personal use at the addresses noted.
NR 660.11(2)(2) The following materials are available for purchase from the American Society for Testing and Materials, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428–2959: NR 660.11(2)(a)(a) ASTM D–93–79 or D–93–80, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester, incorporated by reference for s. NR 661.0021. NR 660.11(2)(c)(c) ASTM D 2267–88, Standard Test Method for Aromatics in Light Naphthas and Aviation Gasolines by Gas Chromatography, incorporated by reference for s. NR 664.1063. NR 660.11 NoteNote: Withdrawn standard, 1992.
NR 660.11(2)(d)(d) ASTM D 2382–83, Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method), incorporated by reference for ss. NR 664.1033 and 665.1033. NR 660.11(2)(e)(e) ASTM D 2879–92, Standard Test Method for Vapor Pressure—Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope, incorporated by reference for s. NR 665.1084. NR 660.11(2)(f)(f) ASTM D–3278–78, Standard Test Methods for Flash Point for Liquids by Setaflash Closed Tester, incorporated by reference for s. NR 661.0021 (1). NR 660.11(2)(g)(g) ASTM E 168–88, Standard Practices for General Techniques of Infrared Quantitative Analysis, incorporated by reference for s. NR 664.1063. NR 660.11(2)(h)(h) ASTM E 169–87, Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis, incorporated by reference for s. NR 664.1063. NR 660.11(2)(i)(i) ASTM E 260–85, Standard Practice for Packed Column Gas Chromatography, incorporated by reference for s. NR 664.1063. NR 660.11(2)(j)(j) ASTM E 926–88, Standard Test Methods for Preparing Refuse-Derived Fuel (RDF) Samples for Analyses of Metals, Test Method C—Bomb, Acid Digestion Method. NR 660.11(2)(L)(L) ASTM D346-75, Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis, incorporated by reference for ch. NR 661 Appendix I. NR 660.11(2)(m)(m) ASTM D420-69, Guide to Site Characterization for Engineering, Design, and Construction Purposes, incorporated by reference for ch. NR 661 Appendix I. NR 660.11(2)(p)(p) ASTM D2879-86, Standard Test Method for Vapor Pressure—Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope, incorporated by reference for ch. NR 664 and subch. BB of ch. NR 665. NR 660.11(2)(q)(q) ASTM G21-70 (1984a), Standard Practice for Determining Resistance of Synthetic Polymer Materials to Fungi, incorporated by reference for ch. NR 664 and subch. N of ch. NR 665. NR 660.11(3)(3) The following materials are available for purchase from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161; or for purchase from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402, (202) 512–1800: NR 660.11(3)(b)(b) The following methods as published in the test methods compendium known as “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods,” EPA Publication SW–846, Third Edition: NR 660.11 NoteNote: A suffix of “A” in the method number indicates revision one (the method has been revised once). A suffix of “B” in the method number indicates revision two (the method has been revised twice). A suffix of “C” in the method number indicates revision three (the method has been revised three times). A suffix of “D” in the method number indicates revision four (the method has been revised four times).
NR 660.11(4)(4) The following materials are available for purchase from the National Fire Protection Association, 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02269–9101: NR 660.11(5)(5) The following materials are available for purchase from the American Petroleum Institute, 1220 L Street, Northwest, Washington, DC 20005: NR 660.11(5)(a)(a) API Publication 2517, Third Edition, February 1989, Evaporative Loss from External Floating-Roof Tanks, incorporated by reference for s. NR 665.1084. NR 660.11(5)(b)(b) American Petroleum Institute Publication, Guide for Inspection of Refinery Equipment, Chapter XIII, “Atmospheric and Low-Pressure Storage Tanks,” 4th edition, 1981, incorporated by reference for s. NR 661.0191 (2). NR 660.11(6)(6) The following materials are available for purchase from the Environmental Protection Agency, Research Triangle Park, NC: NR 660.11(6)(a)(a) Screening Procedures for Estimating the Air Quality Impact of Stationary Sources, Revised, October 1992, EPA Publication No. EPA–450/R–92–019, incorporated by reference for ch. NR 666 Appendix IX. NR 660.11(7)(7) The following materials are available for purchase from the Organisation for Economic Co-operation and Development, Environment Directorate, 2 rue André Pascal, F-75775 Paris Cedex 16, France: NR 660.11(7)(a)(a) Guidance Manual for the Control of Transboundary Movements of Recoverable Wastes, copyright 2009, Annex B: OECD Consolidated List of Wastes Subject to the Green Control Procedure and Annex C: OECD Consolidated List of Wastes Subject to the Amber Control Procedure, IBR approved for ss. NR 662.082 (1), 662.083 (2), (4), and (7), and NR 662.084 (2) and (4). NR 660.11(8)(8) The following Code of Federal Regulation Appendices are available for purchase from Superintendent of Documents, PO Box 371954, Pittsburgh, PA 15250-7954, (866) 512-1800: NR 660.11(8)(k)(k) 40 CFR part 60, Appendix A, Method 3A, Determination of Oxygen and Carbon Dioxide Concentrations in Emissions from Stationary Sources (Instrumental Analyzer Procedure), incorporated by reference for ch. NR 666 Appendix IX. NR 660.11(9)(9) The 1987 Standard Industrial Classification (SIC) is available from the Occupational Safety and Health Administration, 200 Constitution Ave NW, Washington, DC 20210, (800) 321-6742, www.osha.gov, incorporated by reference for ss. NR 661.0003 (3), 661.0004 (1), 661.0032, 668.40, 670.013 (3), and 679.01 (8).
/code/admin_code/nr/600/660
true
administrativecode
/code/admin_code/nr/600/660/b/11/2/r
Department of Natural Resources (NR)
Chs. NR 600-699; Environmental Protection – Hazardous Waste Management
administrativecode/NR 660.11(2)(r)
administrativecode/NR 660.11(2)(r)
section
true